Electrician First Year Mock Test Set 1

ITI Electrician Latest NIMI Pattern Mock test for ITI Candidate all Question for best CBT Exam Skills and Practice Enhance Your Trade

/24

Electrician Trade Theory Set 1

Please Write your Name to show in Result

1 / 24

1 मीटर लंबाई के एक चालक 50 मीटर/प्रति सेकंड वेग से 1.5 वेबर/ मीटर स्क्वायर फ्लक्स घनत्व के एक समान चुंबकीय क्षेत्र करने के लिए समकोण पर मूव करता है प्रेरित किया होगा
A conductor of length 1 m moving at a velocity of 50 m/s at right angles to a uniform magnetic field of flux density 1.5 weber/m square will have induced

2 / 24

निम्नलिखित में से कौन-सा एक ओह्मिक प्रतिरोधक है
Which of the following is an ohmic resistor

3 / 24

एक मेगर में टर्मिनल होते हैं?
How many terminals are there in a megger?

4 / 24

प्रतिरोध R का एक तार की लंबाई तथा प्रतिच्छेदन दोनों दुगना हो जाता है तो इसका प्रतिरोध होगा
If both the length and cross section of a wire of resistance R are doubled then its resistance will be

5 / 24

ट्रांसफार्मर का समीकरण है
The equation of the transformer is

6 / 24

यदि 1 वोल्ट मीटर 112.68 वोल्ट पड़ता है यदि वोल्ट का सही मान 112.6 वोल्ट हो तो स्टैटिक त्रुटि क्या होगी
If 1 volt meter read 112.68 volt what will be the static error if the correct value of volt is 112.6 volt

7 / 24

एक सिनुसाइडल फ्लक्स 0.2 बेवर (अधिक) एक ट्रांसफार्मर द्रितीय Coil के 55 टर्न के साथ जुड़ा है सप्लाई आवृत्ति 50hz है द्रितीय में प्रेरित EMF का RMS मान क्या होगा
A sinusoidal flux 0.2 Beaver (more) is connected to a transformer with 55 turns of secondary coil. The supply frequency is 50hz. What will be the RMS value of induced EMF in secondary?

8 / 24

6 एंपियर की कुलधारा ढोने के लिए डिजाइन किए गए 30 वोल्ट एसी के एक स्रोत से संचालन कर रहे एक समानांतर परिपथ में सुरक्षा डिवाइस (फ्यूज) क्या होगा जब प्रतिरोध अचानक 2 ओम तक बदलता है?
What will happen to the safety device (fuse) in a parallel circuit operating from a source of 30 V AC designed to carry a total current of 6 amps when the resistance suddenly changes to 2 ohms?

9 / 24

निम्नलिखित में से कौन-सा एक डायोड के द्वारा परफॉर्म किए जाने वाले कार्यों में से एक है
Which of the following is one of the functions performed by a diode

10 / 24

काले टेप का कार्य दो केबलो के जोड़ पर उपयोग करना है
The purpose of black tape is to use it at the junction of two cables.

11 / 24

एक 3 फेज 4 तार सिस्टम को आमतौर पर के लिए उपयोग किया जाता है
A 3 phase 4 wire system is generally used for

12 / 24

अर्थिंग इलेक्ट्रोड को भवन से कितने मीटर की दूरी के अंतर्गत स्थापित किया जाना चाहिए जिससे स्थापना सिस्टम को अर्थ किया जा सके
Within how many meters from the building should the earthing rocket be installed, to determine the meaning of the installation system

13 / 24

विद्युत उपकरणों और वायरिंग की सुरक्षा से सुनिश्चित की जाती है
Safety of electrical equipment and wiring is ensured by

14 / 24

सिंगल कोर केबलों को आमतौर पर के कारण बख्तरबंद के साथ निर्धारित नहीं किया जाता है
Single core cables are generally not specified with armored due to

15 / 24

निम्नलिखित में से किसे अर्थिंग के लिए कम से कम प्राथमिकता दी जाती है
Which of the following is given least priority for earthing

16 / 24

निम्नलिखित में से कौन सा कथन ओम नियम को प्रस्तुत नहीं करता
Which of the following statements does not represent Ohm's law

17 / 24

एक इलेक्ट्रॉनिक एम्प्लीफायर में वांछनीय विशेषता क्या है
What is the desirable characteristic in an electronic amplifier

18 / 24

एक मल्टीमीटर का उपयोग मापने के लिए किया जाता है
A multimeter is used to measure

19 / 24

200 वाट 200 वोल्ट लैंप का प्रतिरोध होगा
The resistance of a 200 watt 200 volt lamp will be

20 / 24

निम्नलिखित में से किस डिवाइस का उपयोग निरंतरता के लिए एक इंडक्टर के वाइंडिंग चेक करने के लिए किया जाता है
Which of the following devices is used to check the windings of an inductor for continuity

21 / 24

एक परिपथ में उचित संचालन सुनिश्चित करने के लिए एक फ्यूज को कैसे स्थापित किया जाना चाहिए
How should a fuse be installed to ensure proper operation in a circuit?

22 / 24

निम्नलिखित में से किस तार में सबसे अधिक प्रतिच्छेदन क्षेत्र होता है
Which of the following wire has the largest area of intersection

23 / 24

IE नियमानुसार उपभोक्ता के परिसर में घोषित और वास्तविक वोल्टेज के बीच अधिकतम अनुमति योग्य भिन्नता होनी चाहिए
Maximum permissible variation between declared and actual voltage at consumer's premises as per IE norms

24 / 24

पावर केबल में संचालक का आकार पर निर्भर करता है
The size of the conductor in the power cable depends on

Your score is

The average score is 0%

0%


Electrician First-Year Other Test Sets